Lexicon 300 L Hallgerät mit Fernbedienung
Hallgerät mit10 m absetzbarer Fernbedienung. Die Anschlüsse sind an der 19" Einheit.
Lexicon 300 L Hallgerät der Spitzenklasse. Mit LARC Fernbedienung.
Zwei unabhängige Prozessoren erzeugen einen hervorragenden stereo Hall und können einzeln als auch hintereinandergeschaltet benutzt werden.
Ein klassisches Gerät für höchste Anforderungen mit analogen XLR und digitalen AES/EBU in/outs. Dazu noch digital stereo in/ out über Cinch und Lichtleiter.
Ausreichend Presets, die mit der Fernbedienung in vielen Parametern verändert werden können.
Steuerung über Midi und Timecode möglich.
Mietpreis erster Tag 26.- / jeder weitere Tag 13.- incl. MWSt.
Langzeitvermietung 7 Tage 83.- incl. MWSt.
Langzeitvermietung 14 Tage 107.- incl. MWSt.
Langzeitvermietung 21 Tage 130.- incl. MWSt.
Technische Daten:
Audio Input and A/D Conversion
Input Channels (2): Balanced XLR, pin 2 high
Input Impedance: 50k½ unbal; 100k½ balanced
Full Scale Input Level
Gain switch in 0dB position: +2dBu min, +20dBu max
Gain switch in +16dB position: –14dBu min, +4dBu max
Common Mode Rejection
DC to 2kHz: 60dB minimum
2kHz to 20kHz: 40dB minimum
Frequency Response
48kHz Sampling Rate: 10Hz to 21.5kHz, ±0.2dB
44.1kHz Sampling Rate: 10Hz to 20 Hz, ±0.2dB
Phase Linearity: ±5 Degrees, 10kHz to 20kHz
Delay (Frequency Independent)
From Analog In to Digital Out: 0.75ms
Crosstalk: –80dB maximum, 10Hz to 20kHz
Signal to Noise Ratio: 90dB minimum, A-weighted
Total Harmonic Distortion: 0.01% maximum, 10Hz to 20kHz
Intermodulation Distortion: 0.01% maximum (SMPTE)
Dynamic Range: 90dB minimum
Pre-emphasis: 15μs (±0.9μs) and 50μs (±3μs)
Gain Control: 20dB in 0.1dB increments
D/A Conversion and Analog Out
Output Channels (2): Balanced XLR, pin 2 high
Output Impedance: 75½
Full Scale Output Level: –2dBu to +18dBu
Frequency Response
48kHz Sampling Rate: 10Hz to 21.5kHz, ±0.2dB
44.1kHz Sampling Rate: 10Hz to 20 Hz, ±0.2dB
Phase Linearity: ±5 Degrees, 10kHz to 20kHz
Delay (Frequency Independent)
From Digital In to Analog Out: 1.8ms
Crosstalk: –90dB maximum, 10Hz to 20kHz
Signal to Noise Ratio: 100dB minimum, A-weighted
Total Harmonic Distortion: 0.01% maximum, 10Hz to 20kHz
Intermodulation Distortion: 0.01% maximum (SMPTE)
Dynamic Range: 90dB minimum
De-emphasis: 15μs (±0.9μs) and 50μs (±3μs)
Gain Control: 20dB in 0.1dB increments
Unless otherwise indicated, specifications presume 48kHz sample
rate, Emphasis off, Gain switch and Gain Control at unity (0dB)
Analog Input to Analog Output
Frequency Response: 10Hz to 21.5kHz, ±0.2dB
Crosstalk: –80dB maximum, 10Hz to 20kHz
Signal to Noise Ratio: 90dB minimum, A-weighted
Total Harmonic Distortion: 0.01% maximum, 10Hz to 20kHz
Intermodulation Distortion: 0.01% maximum
Dynamic Range: 90dB minimum
Digital Audio Interfaces
AES/EBU Professional Digital Audio Interface
Balanced female XLR digital input; balanced male XLR digital output.
Conforms to both the AES ANSI S4.40-1985 spec and the EBU doc
tech 3250. Both input and output are transformer-coupled.
Input/Output levels and impedance comply with CCITT V.11 EIA-
422A specification.
EIAJ CP-340/SPDIF Consumer Digital Audio Interface
Unbalanced coaxial RCA-type digital input and output; SPDIF compatible
Optical (fiber optic) type digital input and output.
Sample Frequency
Master: 48kHz ±5Hz; 44.1kHz ± 5Hz
Slave: 42kHz to 50kHz;
Control Interfaces
Time Code Input: Balanced female XLR, EIA-422
input, 100mV p-p minimum.
Formats Supported Speed Range
SMPTE 0.75 to 1.18
EBU 0.80 to 1.33
Film 0.82 to 1.33
MIDI Interface:
5-pin DIN connectors provided for
MIDI In, MIDI Out and MIDI Thru.
General
Dimensions: 19.0W x 3.5H x 13.6D in
(483 x 89 x 346 mm)
19in rack mount standard, 2U high
Net Weight: 18.9 lbs (8.6 kg)
Shipping Weight: 24.5 lbs, (11.1 kg)
Power Requirements: 100/120/220/240 VAC (–10, +5%)
50-60 Hz, 3-pin IEC connector
Power Consumption: 75 VA maximum
Environment
Operating Temperature: 32° to 95°F (0° to 35°C)
Storage Temperature: –22° to 167°F (–30° to 75°C)
Humidity: 95% max without condensation
Safety Approvals: CLA Approval
